If you avoid the plugging phenomenon of garnet sand

May 28, 2022
If you avoid the plugging phenomenon of garnet sand
    Since pomegranate sand was used in industry, it has been used in more and more fields, especially in the water jet cutting industry. Pomegranate sand has become one of the most widely used abrasives for water cutting. It is used in glass parquet, cutting, stone parquet cutting, etc. More. At the same time, there are more and more pomegranate sand manufacturers on the market, and the quality of pomegranate sand is also uneven. If you choose inferior manufacturers, there will be plugs during water cutting operations. The following editor will explain to you. If you avoid these problems.
ZHENGZHOU HAIXU ABRSAIVES CO.,LTD
 
1. Look at the negative pressure gauge
    If the negative pressure is significantly lower than the set value, there may be impurities accumulated in the throttle end of the nut at the outlet of the sandbox. In this case, you directly open the nut of the welded pipe joint, put down the sand control valve, and then use a screwdriver to remove the throttle valve seat. Generally, impurities will flow out with the garnet sand. But if it still doesn't work, there may be too much or too much clutter in the buildup, which requires you to remove the sandbox to clear the clutter.
 
2. Observe that there is no negative pressure on the negative pressure gauge
 
    In this case, foreign matter or excessive garnet sand is generally accumulated between the sand control valve body and the sand conveying pipe joint. The removal procedure in this case is a bit more complicated. It is necessary to remove the sand valve joints, sand conveying pipes and sand conveying pipe joints one by one, and then clean them with high pressure gas, so that the sundries can generally be removed and normal use can be resumed
 
3. Find a well-known pomegranate sand company
 
    In fact, the best way is to find a manufacturer with a high level of pomegranate sand production. Zhengzhou Haixu Abrasives Co., Ltd. has been established for more than ten years. Since the establishment of the factory, the company has always attached great importance to the quality of pomegranate sand and has a very good reputation in the industry. The pomegranate sand produced by the company has no dust, uniform particle size, and no problem of sand pipe plugs. It is an ideal choice for your pomegranate sand manufacturer.